Porcine IgM ELISA

$870.00

The Eagle Biosciences Porcine (Pig) IgM ELISA Assay Kit is designed for the quantitative determination of porcine IgM in complex samples (serum or other biological samples).  The Porcine (Pig) IgM ELISA Assay Kit is for research use only and should not be used in diagnostic procedures.

Porcine IgM ELISA:

For Research Use Only

Size: 1×96 wells
Sensitivity: 156 ng/ml (sample dilution 1:10)
Dynamic Range: 15.625 – 1000 ng/ml
Incubation Time: 4.5 hours
Sample Type: Serum, biological fluids
Sample Size: 10 µL

Additional Information

Assay Principle

The determination of pig IgM is carried out as direct sandwich ELISA. An antibody specific for pig IgM has been pre-coated onto a microplate. Standards and samples are pipetted into the wells and any IgM present is bound. After washing away any unbound substances, an enzyme-linked antibody is added. Following a wash, a substrate solution is added to the wells and color develops in proportion to the amount of antibody conjugate. The absorption at 450 nm is proportional to the IgM concentration.

Assay Procedure

A. Preparation

1.Bring all reagents to room temperature
2.Dilute wash buffer 1:10
3.Prepare the standard curve from a 1:2-dilution series of standard concentrate with diluent
4.Dilute samples with diluent
5.Dilute freshly HRP conjugate 1:100 with diluent

B. Performance

1.Pipette 100 µl of samples, standards, diluent (blank) into the wells
2.Incubate for 1 hour at room temperature with shaking (or 2 hrs without shaking)
3.Wash three times with 300 µl of wash buffer
4.Add 100 µl of HRP conjugate to each well
5.Incubate for 1 hour at room temperature with shaking (or 2 hrs without shaking)
6.Wash three times with 300 µl of wash buffer
7.Dispense 100 µl of TMB substrate solution
8.Incubate for 10 minutes at room temperature in the dark
9.Add 100 µl of stop solution
10.Measure absorption at 450 nm

Typical Standard Curve

Manual

Product Manual